Pulse has expanded its range of high-power catalogue flyback transformer in the EFD15+ package with the introduction of the PAT6261 series. Using Pulse’s winding automation technology, the series is built with a very small form-factor of 16.5 mm x 22.3 mm x 10.5mm and uses the highly popular EFD core shape construction, known for…
Pulse is excited to announce the launch of the new PG1895NL of EFD20 flyback transformer specifically designed for SiC or IGBT devices switching. The PG1895NL is a 6W flyback which provides five groups of output with footprint size 29.4mmx25.5mmx12mmMax, and the hipot could reach 2400Vrms isolation voltage Max. One typical application is that PG1895NL could be…
Achieving higher power density and fully utilizing board space are challenges for power supply designs, especially in applications for industrial, communications, and personal electronics markets. Pulse’s newest line of miniature molded inductors, the BDQQ series, looks to tackle these challenges by reducing the overall losses in point-of-load designs (PoL), especially buck converter applications for smart…
Pulse is excited to announce the launch of an automotive grade IATF certified version of our popular PH9505 series of high isolation current sense transformer, which remains same platform and footprint size with PH9505. The PMS9505 uses a unique construction where the primary winding which is molded into the plastic base forming a solid insulation…
Pulse is expanding their portfolio of high current, low DCR inductors used in single phase PoL and multi-phase buck converters to power processors, memory modules, FPGAs and ASICS in servers, datacenters, networking systems and graphics cards. The three new families provide lower core loss using the latest high frequency materials, reduced DCR, and higher current…
Pulse Electronics expands its portfolio of high current, low DCR inductors with release of PGL6477 & PGL6478 series. The PGL6477/78 product series can be used in single phase PoL and multi-phase buck converters to power processors, memory modules, FPGAs and ASICS in servers, datacenters, networking systems and graphics cards. These new product series provide lower…
Pulse continues to expand our portfolio of inductors used to power processors, memory, FPGAs, and ASICs in applications such as servers, datacenters, and storage systems. Our latest product developments are specifically designed for use with the trans-inductor voltage regulator (TLVR) topology but leverage our existing high volume automated manufacturing to ensure quality, reliability, and cost-effectiveness.…
Pulse is proud to announce the launch of its first high frequency inductor series designed specifically for Quasi Resonant Converters. PH9499.xxxCNL is a 0.95uH–1.25uH/3.5Arms series of inductors optimized for the 800kHz – 1.2MHz frequency of operation, typical of this topology. Litz wire is used to limit the ratio of AC to DC resistance to…
Pulse is delighted to announce the launch of its first IATF flyback transformer specifically designed for SiC device switching. The PM9595NL is a 3W flyback transformer which provides a +20V for device switch on as well as a -5.5V for robust switch off. The extended creepage distance EP7 platform provides 4.3kV DC withstand voltage in…
Pulse is expanding their portfolio of high current, low DCR inductors used in single phase PoL and multi-phase buck converters to power processors, memory modules, FPGAs and ASICS in servers, datacenters, networking systems and graphics cards. The four new families provide lower core loss using the latest high frequency materials, reduced DCR, and higher current…
